Jeden dotaz – připojím k Mac Studio iMac 27 z roku 2013? Jako externí monitor?
Redukce usb-c na thunderbolt a pak přes thunderbolt kabel? A připojení pomocí cmd+F2?
Díky za názor.
PaK
How to use target display mode
Make sure that your iMac is started up and meets the system requirements above.
Make sure that the other Mac is started up and logged in to a macOS user account.
Connect the two computers using the appropriate Mini DisplayPort or Thunderbolt cable.
You can use more than one iMac as a display, if each iMac is using a Thunderbolt cable to connect directly to a Thunderbolt port on the other Mac (not the other iMac).
Press Command-F2 on the keyboard of the iMac. You should now see the desktop of the other Mac.
To exit target display mode, press Command-F2 again. Or disconnect the cable, or restart either Mac.
Jeden dotaz – připojím k Mac Studio iMac 27 z roku 2013? Jako externí monitor?
Redukce usb-c na thunderbolt a pak přes thunderbolt kabel? A připojení pomocí cmd+F2?
Díky za názor.
PaK
Historicky žádný iMac nikdy nemohl sloužit jako externí displej pro jakýkoli Mac
To by me uprimne taky zajimalo, mohlo by to byz zajimave reseni pro vyuziti starsiho 27 imacu a upgrade na M1.
Dejte vedet, pokud to zjistite.
Historicky žádný iMac nikdy nemohl sloužit jako externí displej pro jakýkoli Mac
Podle mě to nějak funguje do roku 2013.
Například:
https://www.youtube.com/watch?v=_SOnL2NYOOk
https://www.youtube.com/watch?v=WP1fnrHNuTE&t=395s
:)
No myslím do roku 2013 jde iMac použít jako externí monitor pro macbooky.
Například:
https://www.youtube.com/watch?v=WP1fnrHNuTE&t=395s
https://support.apple.com/en-us/HT204592
Tak do roku 2014.
How to use target display mode
Make sure that your iMac is started up and meets the system requirements above.
Make sure that the other Mac is started up and logged in to a macOS user account.
Connect the two computers using the appropriate Mini DisplayPort or Thunderbolt cable.
You can use more than one iMac as a display, if each iMac is using a Thunderbolt cable to connect directly to a Thunderbolt port on the other Mac (not the other iMac).
Press Command-F2 on the keyboard of the iMac. You should now see the desktop of the other Mac.
To exit target display mode, press Command-F2 again. Or disconnect the cable, or restart either Mac.
A je otázka, zda to půjde na Mac Studio :)
brko jak cyp.. jen škoda že Apple moc není na hry.. vydělal by na tom taky peníze.. navíc pokud si hráč připoji až 5 monitoru bude v 7 nebi jako..
Ano omlouvám se, dříve to skutečně šlo, ovšem neměl jsme za to, že někdo bude 10 let starý iMac používat jako monitor :)
:)
no nějak jsem na tom svým iMacu závislý a nevím se ho vzdát. A fotografie se na něm upravují stále skvěle (jen je již pomalej).
http://www.praha-foto.com